Conventional canopy sets develop the same complaints on every rental fleet: high water temperature under load, poor load acceptance, blocked ventilation, radiators that clog and will not clean, manual air bleeding after long storage, awkward servicing — and noise.
The AEE-D-II was designed to close every one of those gaps at once, balancing ventilation, load capability and low noise against each other rather than trading one for another.
Standard configuration. Alternative engines, alternators, voltages and frequencies are configurable per order.
| Item | Value |
|---|---|
| Series | AEE-D-II |
| Rated power | 500 – 700 kW (625 – 875 kVA) |
| Application | Rental generator set |
| Engine | Cummins · Volvo · Scania · Baudouin · Perkins · Weichai |
| Alternator | Stamford · Leroy-Somer · Mecc Alte · Dingge |
| Engine speed | 1500 / 1800 rpm |
| Rated frequency | 50 / 60 Hz |
| Phases | 3 |
| Three-phase rated voltage | 380–480 V |
| Power factor | 0.8 |
| Frequency droop | ≤ 3 % |
| Frequency recovery time | ≤ 3 s |
| Cooling | Forced-air ventilation; radiator and fan in an isolated bay |
| Engine fuel consumption | ≤ 192 g/kWh |
| Noise level | ≤ 65 ±1dB(A) @ 7m |
| Control system | Digital |
| Paralleling controller | SmartGen HGM9510N (ComAp, DSE, DEIF optional) |
| Internal structure | Three independent compartments |
| Enclosure | Container type, fully welded |
| Dimensions (L × W × H) | 5550 × 2200 × 2520 mm |
| Set weight | 10000 – 12000 kg |
| Fuel tank | Integrated base tank, 2100 L |
| Protection class | IP44 (IP54 optional) |
| Ambient range | −15 °C to +50°C (−40 °C with jacket water heater) |
| Altitude | ≤ 2000 m |
| Muffler | Hospital-grade, impedance-composite |
| Standards | ISO 8528-5:2018 · ISO 8528-10:2022 · GB/T 2820.5:2025 · CE |
| Transport | 3 units per 17.5 m step-deck — freight saving 30 % + |
The solid-state battery concept: fill diesel, close and lock the door, walk away. The set runs unattended with high reliability, and all side components sit flush so nothing catches in transit.
Proprietary acoustic treatment with a wind-tunnel-derived hospital-grade muffler. Quiet enough for outdoor music festivals, residential night work, broadcast feeds and city-centre events.
Three independent compartments, 3 % + better fuel economy and 12 dB + lower noise than the previous generation of canopy designs.
More than 50 % fewer failures than shaft-driven and conventional designs, thanks to a simplified cooling drive path and dual fuel filtration.
2100 L integrated base tank with fuel level display, sized for a full day at typical load. Optional auto-refuelling for week-long unattended duty.
Single-button start/stop on the container panel, panel lighting plus internal service lighting for night work, and control redundancy to cut maintenance time.
Main-stage and broadcast loads where noise limits are written into the permit.
Site power through the whole build programme, paralleled as the load grows.
Water treatment, pumping stations and grid support during planned outages.
Paralleled N+1 blocks with SmartGen synchronisation and remote monitoring.
Dust, heat and salt-fog environments with the three-proof package.
The most-requested band in most fleets — standardise your 500–700 kW inventory on one platform.
The compact workhorse — six units per 13.7 m trailer.
View specificationA true 20 ft high-cube power station for continuous-duty base load.
View specificationA 40 ft high-cube natural-gas plant for base load where gas is already on site.
View specificationEvery parameter side by side, plus the shared platform specification and options list.
Compare allTell us the kW, quantity, voltage, engine preference and destination port — we reply with drawings, weight, fuel curves and a quotation.