ASIA ELEPH registered trademark ASIA ELEPHQuiet · Reliable · Efficient
Home / Products / AEE-D-Ⅲ · 1000–1200 kW

AEE-D-Ⅲ · 1000 – 1200 kW

A true 20 ft high-cube power station. 6058 × 2438 × 2896 mm of continuous-duty plant for island grids, mining camps, industrial base load and large standby blocks — two units per standard 13 m flatbed.

Output 1000–1200 kW Apparent 1250–1500 kVA Noise ≤ 65±1dB(A) @ 7m 20 ft high-cube
AEE-D-Ⅲ 1000–1200 kW generator set, side view
Noise @ 7m≤ 65±1dB(A)
DutyContinuous
Footprint6058 × 2438 mm
ProtectionIP44 / IP54 opt.
Station customised

A 20 ft high-cube that runs as base load.

Above 1 MW the job stops being temporary power and starts being a power station. The set has to carry base load around the clock, in heat, dust and salt air, with service intervals measured in months rather than hire days — and it still has to arrive on a standard truck.

The AEE-D-Ⅲ station series uses the full 20 ft high-cube envelope to give the engine, radiator and exhaust treatment the volume they need for genuine continuous duty, while shipping two units on a 13 m flatbed and keeping the same control platform as the rest of the range.

  • Full rated output at 50°C — three thermally independent compartments keep radiator heat out of the engine bay.
  • Electric fuel priming pump — no manual air bleeding after long storage.
  • Dual fuel filtration — fewer shutdowns from blocked filters on poor-quality diesel.
  • Integrated service module — no oil spill or seepage during routine maintenance.
Technical data

Specification

Standard configuration. Alternative engines, alternators, voltages and frequencies are configurable per order.

Fuel consumption and set weight are typical values — figures vary with engine and alternator build, and noise is the four-direction average at 75 % load. Tested figures for your exact build are confirmed with the quotation.
ItemValue
SeriesAEE-D-Ⅲ · station
Rated power1000 – 1200 kW (1250 – 1500 kVA)
ApplicationSuper-silent power station — continuous duty
EngineCummins · Baudouin · Perkins
AlternatorStamford · Leroy-Somer · Mecc Alte · Dingge
Engine speed1500 / 1800 rpm
Rated frequency50 / 60 Hz
Phases3
Three-phase rated voltage380–480 V
Power factor0.8
Frequency droop≤ 3 %
Frequency recovery time≤ 3 s
CoolingForced-air ventilation; radiator and fan in an isolated bay
Engine fuel consumption≤ 197 g/kWh
Noise level≤ 65 ±1dB(A) @ 7m
Control systemDigital
Paralleling controllerSmartGen HGM9510N (ComAp, DSE, DEIF optional)
Internal structureThree independent compartments
EnclosureContainer type, fully welded
Dimensions (L × W × H)6058 × 2438 × 2896 mm (20 ft high-cube)
Set weight16000 – 17000 kg
Fuel tankIntegrated base tank, 2000 L
Protection classIP44 (IP54 optional)
Ambient range−15 °C to +50°C (−40 °C with jacket water heater)
Altitude≤ 2000 m
MufflerHospital-grade, impedance-composite
StandardsISO 8528-5:2018 · ISO 8528-10:2022 · GB/T 2820.5:2025 · CE
Transport2 units per 13 m flatbed — freight saving 30 % +
Noise measured as sound pressure level at 7m under ISO 8528 conditions; final tested figure depends on engine and exhaust configuration.
Product highlights

What your operators will notice

Safe — unattended by design

The solid-state battery concept: fill diesel, close and lock the door, walk away. The set runs unattended with high reliability, and all side components sit flush so nothing catches in transit.

Silent — 65±1dB(A) at 7m

Heavy acoustic treatment and wind-tunnel-derived muffler geometry in a full-height enclosure. Keeps a 1 MW+ plant inside industrial and semi-urban site limits.

Energy saving — patented layout

Three independent compartments, 3 % + better fuel economy and 12 dB + lower noise than the previous generation of canopy designs.

Low failure rate

More than 50 % fewer failures than shaft-driven and conventional designs, thanks to a simplified cooling drive path and dual fuel filtration.

Continuous-duty rating

Engineered for around-the-clock base load: integrated base tank with level display, optional auto-refuelling, and service access designed for long intervals.

One-touch operation

Single-button start/stop on the container panel, panel lighting plus internal service lighting for night work, and control redundancy to cut maintenance time.

Typical duty

Where the 1000–1200 kW band works best

Island & weak grids

Base load for island communities and remote grids, paralleled in multiples for redundancy.

Mining & remote industry

Continuous power at altitude and in dust, with the three-proof package.

Industrial base load

Factories, processing plants and industrial parks running on their own generation.

Data centre prime & standby

Large paralleled blocks for campus-scale loads.

Oil & gas installations

Offshore platforms and oilfield camps with HSE-compliant delivery and salt-fog protection.

Emergency & disaster response

Restoring supply to hospitals, water systems and shelters after grid failure.

Keep comparing

Other power bands

Get the full station-series datasheet and the price.

Tell us the kW, quantity, voltage, engine preference and destination port — we reply with drawings, weight, fuel curves and a quotation.

Get a Quote Call