ASIA ELEPH registered trademark ASIA ELEPH Quiet · Reliable · Efficient
Home / Products

Four super-silent series, customised delivery,
250 – 1250 kW

The same welded container architecture, control platform and service logic across the whole range — so one spare-parts shelf and one operator training course cover your entire fleet.

Side by side

What capacity fits your fleet?

Quiet, fuel-efficient ASIA ELEPH generator sets — reliable low-noise units that expand your rental fleet.

Parameter AEE-D-I · 250–400 kW AEE-D-II · 500–700 kW AEE-D-Ⅲ · 1000–1200 kW AEE-G-I · 1250 kW
Power output 250 – 400 kW 500 – 700 kW 1000 – 1200 kW 1250 kW
Apparent power 313 – 500 kVA 625 – 875 kVA 1250 – 1500 kVA 1563 kVA
Design purpose Rental duty Rental & station duty Super-silent diesel power station Super-silent natural-gas power station
Engine options Cummins · Volvo · Scania · Perkins · Weichai · Hanma Cummins · Volvo · Scania · Baudouin · Perkins · Weichai Cummins · Baudouin · Perkins Weichai
Alternator options Stamford · Leroy-Somer · Mecc Alte · Dingge Stamford · Leroy-Somer · Mecc Alte · Dingge Stamford · Leroy-Somer · Mecc Alte · Dingge Stamford · Leroy-Somer · Mecc Alte · Dingge
Module Paralleling module with 4G remote monitoring Paralleling module with 4G remote monitoring Paralleling module with 4G remote monitoring Paralleling module with 4G remote monitoring
Muffler Hospital-grade, impedance-composite Hospital-grade, impedance-composite Hospital-grade, impedance-composite Hospital-grade, impedance-composite
Noise level @ 7m ≤ 63 ±1dB(A)* ≤ 65 ±1dB(A)* ≤ 65 ±1dB(A)* ≤ 70 ±1dB(A)*
Engine fuel consumption ≤ 187 g/kWh* ≤ 192 g/kWh* ≤ 197 g/kWh* —
Set weight 4000 – 7000 kg 10000 – 12000 kg 16000 – 17000 kg 26000kg
Dimensions (L × W × H) 4200 × 1500 × 2500 mm 5550 × 2200 × 2520 mm 6058 × 2438 × 2896 mm 12192 × 2438 × 2896 mm
Transport efficiency 6 units / 13.7 m step-deck — freight saving 40 % + 3 units / 17.5 m step-deck — freight saving 30 % + 2 units / 13 m flatbed — freight saving 30 % + Standard 40 ft high-cube — customs freight saving 20 % +
Fuel tank Integrated base tank, 1300 L Integrated base tank, 2100 L Integrated base tank, 2000 L Natural gas supply; automatic engine-oil make-up tank
Enclosure Container type Container type Container type (20 ft high-cube footprint) Container type (40 ft high-cube footprint)
Fuel savings ≥ 3 % ≥ 3 % ≥ 3 % —
Detail PDF Detail PDF Detail PDF Detail PDF
Ratings are quoted at power factor 0.8, three-phase, 50 Hz. Noise measured as sound pressure level at 7m under ISO 8528 conditions — the exact figure depends on engine and exhaust configuration and is stated in your quotation. Emission compliance for EU / UK mobile (NRMM) applications requires Stage V engines — please confirm the destination market with us before quoting. * Values may vary with engine brand and power rating.
Common platform

Shared technical specification

Everything below is identical across all four series, which is what keeps fleet training and spare parts simple.

ItemSpecification
Rated frequency50 / 60 Hz
Engine speed1500 / 1800 rpm
Power factor0.8
Phases3
Three-phase rated voltage380–480 V
Frequency droop≤ 3 %
Frequency recovery time≤ 3 s
Control systemDigital
Paralleling controllerSmartGen HGM9510N (ComAp, DSE, DEIF optional)
Internal structureThree independent compartments
CoolingForced-air ventilation; radiator and fan in an isolated bay
Protection classIP44 (IP54 optional)
Ambient design range−15 °C to +50°C (to −40 °C with jacket water heater)
Altitude≤ 2000 m without derating
Applicable standardsISO 8528-5:2018 · ISO 8528-10:2022 · GB/T 2820.5:2025 · CE
Factory testsLoad test at 0 / 25 / 50 / 75 / 100 / 110% · control function · protection function
Control & monitoring

SmartGen HGM9510N on every set (ComAp, DSE, DEIF optional)

One controller platform across the fleet means one commissioning procedure, one set of spares and one monitoring integration for your whole operation.

  • Paralleling built in — voltage / frequency / phase-angle synchronisation with soft load transfer when paralleling and unloading.
  • 32-bit ARM controller, LCD 240 × 128 with backlight, multi-language including English.
  • Interfaces: RS485, USB, Ethernet, CAN bus (J1939 for electronic engines).
  • I/O: 10 outputs, 10 programmable inputs, 3 fixed + 2 programmable analogue sensors.
  • Class 0.5 AC measurement accuracy; IP65 controller enclosure; −25 to 70 °C operating range.
  • Remote fleet option: multi-unit monitoring via HMU15N, plus GPS through the cloud gateway platform.

Fleet monitoring, optional

Add the cloud gateway and every set reports location, running hours, load, fuel level and alarms back to your dispatch desk. For rental operators this is usually the difference between reactive and planned service.

AC accuracyClass 0.5
EnclosureIP65
SupplyDC 8 – 35 V
Operating temp.−25 – 70 °C
Ask about remote monitoring
Configure it your way

Optional equipment

Tell us the climate, the fuel quality and the duty cycle — we build to it.

Engine

  • Jacket water heater
  • Automatic oil make-up
  • Low oil level alarm
  • China IV/Stage V

Alternator

  • Anti-condensation heater
  • RFI suppressor
  • Winding temperature monitoring
  • Bearing temperature monitoring
  • Controller: ComAp, DSE, DEIF

Fuel system

  • Bunded base fuel tank
  • Automatic refuelling system
  • Dual filtration (standard)

Enclosure & set

  • Open set (no canopy)
  • Lower noise requirement
  • Environmental protection: mould, humidity, salt fog
  • IP54 protection
We supply complete units only: every set is fully assembled and load-tested in our works, then shipped as a whole — ready to connect and run on arrival. All assembly and commissioning is done before shipment, so there is no site assembly, tooling or assembly crew to plan for.
Buyer's questions

Questions rental operators ask us first

Straight answers on noise, heat, transport and delivery — the things that decide whether a set works for your fleet.

How quiet is it, and at what distance?
As low as 63 ± 1 dB(A) measured at 7 metres on the 250–400 kW series — about the level of a normal conversation at one metre. That figure is measured at 7 m, not 1 m, so it is directly comparable across suppliers. The 500–700 kW and 1000–1200 kW series are rated at ≤ 65 ± 1 dB(A) at 7 m, and the 1250 kW gas plant at ≤ 70 ± 1 dB(A) at 7 m.
Will it hold full power in hot climates?
Yes. Every ASIA ELEPH set delivers 100% rated output continuously at 50 °C ambient — most conventional canopy sets are only rated to 40 °C. Independent intake, exhaust and radiator compartments, plus inverter-controlled variable-speed fans, keep the engine in its comfort zone. For cold-start duty down to −40 °C, a jacket water heater is available.
Can the sets be stacked to save freight?
Yes. The AEE-D-I 250–400 kW series is stackable two-high, with six units on a 13.7 m step-deck trailer — cutting freight per kW by over 40% versus conventional canopy sets. The 500–700 kW series fits three per 17.5 m trailer (30%+ saving). All side components sit flush with the container plane, so there are no snag points during lifting, stacking or trucking.
Can I parallel several units for a larger project?
Yes. Every set comes with a SmartGen HGM9510N paralleling controller as standard (ComAp, DSE or DEIF optional). It synchronises voltage, frequency and phase angle and transfers load softly, so 2 to 32 sets can run as one bus. You do not need a separate paralleling cabinet — the standard 1+N design covers complex rental scenarios.
Which power range and fuel options do you offer?
Four standard series: AEE-D-I 250–400 kW, AEE-D-II 500–700 kW and AEE-D-Ⅲ 1000–1200 kW diesel, plus the AEE-G-I 1250 kW gas plant (five 250 kW sets paralleled inside one 40 ft high-cube container). All run on 50/60 Hz with a 0.8 power factor and 380–480 V three-phase output.
What certificates and test reports can you provide?
Sets are designed and type-tested to ISO 8528-5:2018, ISO 8528-10:2022 and GB/T 2820.5:2025, and are CE marked; the factory holds ISO 9001 / 14001 / 45001. Every single unit is load-bank tested at 0/25/50/75/100/110% before shipment. Important for EU/UK projects: mobile (NRMM) equipment placed on those markets requires Stage V engines — talk to our sales team before quoting, and we will confirm the exact certified engine configuration available for your destination. Standard configuration otherwise meets China Stage III / EU Stage IIIA.
Built for your market

One platform, tuned to the job that pays

Whether you hire to events, build islands grids or keep a data centre alive, the same standardised machine adapts — so your crews learn one set and your spares stock stays small.

Rental fleets

Standardised fleet assets your crews already know. Easy-clean surfaces, a one-touch panel and fast wash-down keep turnaround short — service it, re-dispatch it, and it is back on hire the same day. Stackable and containerised for cheap relocation between sites.

Hot climates & remote sites

Full 50 °C rated output for Middle East, South-East Asian, tropical and mining sites. Corrosion class C5-M coating (ISO 12944) and a three-compartment thermal design handle salt fog, dust and continuous base load far from the grid.

Island grids & weak grids

Parallel 2–32 units into one bus for continuous-duty base load, weak-grid support and isolated mining or island communities. Built-in synchronisation and soft load transfer keep the supply stable as demand swings.

Events, data centres & standby

63 dB(A) at 7 m keeps the power out of the audio mix at outdoor events and broadcast sites. For N+1 / 2N standby, multi-set paralleling and optional cloud fleet monitoring give data centres and utilities redundancy they can verify remotely.

Need drawings, weights and fuel curves?

Send us your power requirement, quantity, voltage and destination port — we reply with a full English technical proposal, usually within two working days.

Get a Quote Call